top of page

Hood 7000 Loader

Hood Equipment has been designing and manufacturing quality loading equipment for over 50 years. At Industrial Disposal Supply, we will provide you with the professional knowledge and guidance to ensure that you’re getting the right piece of handling equipment for your disposal needs. See below for additional information on the Hood 7000 Series loader.


Additional Information

Lift Capacity at 10’ – 7,871 pounds


Standard boom length: 22 feet

Main knuckle sections: fabricated high tensile steel

Pivot Pin diameter of 2-1/2”


48” extend-o-boom

Boom lengths up to 27’


Pad size: 12 inches by 12 inches

Spread: 10’6” feet at ground level

Cylinder size – 3 inches with bore 40-inch stroke by 2-inch rod

Individually controlled stabilizers

Automatic load locks maximize stability on uneven terrain, stabilizers easily operated from main control position


Hydraulic System

Main boom cylinder: 6” bore x 36” stroke x 2-1/2” rod

Jib boom cylinder: 5” bore x 30” stroke x 2-1/2” rod all cylinder barrels are heavy wall tubing

Reservoir: 38 gallons with –

Oil cooler recommended

Continuous rotation pressure manifold

Filters – double return 10-micron mounts in reservoir


on-demand gear pumps

working pressure 2250 PSI

Lever control standard

Optional: pilot control system


All pressure hoses are constructed of 4-wire braided hose

High pressure tubing is used in non-flex areas

Frame Structure

Octagon construction: fabricated high-tensile steel

Operators Platform

features open grate steel flooring and leg guard for safety

Swing Motor

Planetary swing drive gearbox with fail safe brake with large 28” turntable bearing

bottom of page