Bulldozer & Chisel
Bulldozer
Depending on the design, the bulldozer is suitable for channel diameters between 7.9" and 118". During this process, it does not float. It thus ensures excellent basic cleaning even in channels that have a lot of water passing through them.
Chisel
The Bulldog® Antiblast specifically reduces these pressure differences, thereby minimizing the risk of water escaping through connected sanitary installations. The Bulldog® Antiblast was developed and tested by enz® in collaboration with a renowned technical institute and meets high standards for functionality and cleaning performance.
Bulldozer Specifications
Connecting Thread (inch)
3/4" - 1 1/14"
Application Range (inch)
12 - 100
Thrust Jet
6 x M10, 2 fan jet M10
Front Jet
1 x M10
Dimensions (inch)
20.1 x 10.8 x 10.6
Min. G/Min. at 1,450 psi | Min. G/Min. at 14.500/22,000 psi
26 - 79
Recycling
ok
Weight (lb.)
26.46 - 86.42
Maximum Pressure (psi)
3,600
Chisel Specifications
Connecting Thread (inch)
3/4" - 1 1/4" NPT
Application Range (inch)
1.1 - 32
Thrust Jet
3 x M4 - 6 x M10
Front Jet
4 x M4 - 4 x M8
Jet Angle Backward
10° - 25°
Jet Angle Forward
15°
Min. G/Min. at 1,450 psi | Min. G/Min. at 14.500/22,000 psi
7.9 - 79
Recycling
ok
Weight (lb.)
0.07 - 18.52
Maximum Pressure (psi)
3,600 - 5,000
Dimensions (inch)
1 x 1.7 - 3.9 x 10.2
