DuraTech Model 2009 Industrial Tub Grinder
The DuraTech 2009 industrial tub grinder has an impressive list of features that has made it one of the most efficient and affordable grinders on the market. These include a CAT C9 325 hp (242.4kw) Tier III diesel engine, a self-adjusting HPTO microprocessor-controlled clutch, and an enclosed engine compartment with a self-cleaning air intake system. The DuraTech 2009 industrial tub grinders are built to grind and built to last.
Additional Information
Weight (Pintle Hitch) 24,200lbs (10,976.94 kg)
Transport Width 8′ 3-1/2″ (2.52 m)
Length (Pintle Hitch) 29′ 1/4″ (8.84 m)
Axle 18,500 lbs (8,409.6kg) Single Axle
Tongue Weight (Pintle Hitch) 5,700 lbs (2,585.5 kg)
Brakes Air
Electrical 12 Volt
Tires (2) 455/50R22.5 Super Singles
Fuel Capacity 100 Gallons (378.5 L)
Hydraulic Oil Capacity 50 Gallons (189.3 L)
Lights Tail, Clearance and Directional
Engine Caterpillar C9 325 HP (242.4 kw)
Tier III Electronic Diesel
Clutch PT Tech HPTO-12
Governor Electro-Hydraulic Sensing
Tub Width 9′ 6-3/8″ (2.91 m) at Flare
Depth 3′ 4″ (1.02 m)
Tub Diameter at Base 7′ 6″ (2.27 m)
Tub Wall 3/16″ (.476 cm) thick
Tub Floor 1/4″ (.635 cm) thick
Tub Drive Hydraulic Orbit Motor
Discharge Conveyor 21′ 6″ (6.55 m) Top Drive –
24″ (60.96 cm) Wide
Belly Conveyor 30″ (76.2 cm) Wide with a V Cleat
Tub Speed Sensor Electronic Self Governing
Safety Switches Safety Shutdown
Hammers 18 Fixed Single Bolt Hammers,
36 Swinging Hammers
Hammermill Opening 41″ x 25″ (104.14 cm x 63.5 cm)
Length 40″ (101.6 cm)
Cylinder Plates 16″ (40.64 cm) in Diameter
1-1/2″ (3.81 cm) ick
Cylinder Shaft 4-1/2″ (11.43 cm) Stress Proof Steel
Hammermill Drive Direct Drive with Built in Torque Limiter
Bearings 3-1/2″ (8.89 cm) Pillow Block Bearings
Hammer Rods 1-1/2″ (3.81 cm) Diameter
Screens 1″ (2.54 cm) ick Split Screens
Transport Height w/ Tub Cover 129.85 in (329.82 cm)