DuraTech Model 5064T Horizontal Grinders
Meet the newest additions to the DuraTech family of grinders, the Model 5064 Horizontal Grinders. These Heavy-Duty grinders are equipped with CAT engines; Tier III (5064, 5064T). An HPTO wet clutch transfers power to the hammermill which is fed by a self-governing floor apron and feed roller to meet your specific requirements of productivity and efficiency.
Specifications
Weight
Total Weight: 80,000 lbs. (36,287.4 kg)
Track System
CAT 320 L Track System 20″ (50.8 cm) Wide x 15′ (4.6 m) Long Steel Track
Machine Dimensions
Transport Width: 9 ft. 10 in. (3 m)
Transport Height: 11 ft. 5 in. (3.48 m)
Transport Length: 37 ft. 8 in. (11.48 m)
Drive System
Engine: Caterpillar C-18 Tier III 630 HP (470 kw) Diesel Engine
Caterpillar C-15 Tier III 540 HP (403 kw) Diesel Engine
Caterpillar C-15 Tier III 475 HP (354 kw) Diesel Engine
Clutch: HPTO 14 TD Wet Clutch
Fuel Capacity: 300 Gallons (1,135 L)
Hydraulic Oil Capacity: 145 Gallons (548.9 L)
Rotor Drive: 4 Groove Belt
Feed System
Hopper Capacity: 197 Cubic Ft. (5.59 cu. m)
Hopper Width: 61-1/2 in. (156.2 cm) Bottom, 74 in. (187.7 cm) Top
Hopper Length: 13 ft. 2 in. (4.01 m)
Hopper Depth: 35 in. (88.9 cm)
Feed Opening: 61-1/2 in. X 35 in. (156.2 cm x 88.9 cm)
Hopper Loading Height: 96 in. (234.8 cm)
Feed Roller: 36 in. (91.44 cm) dia.
Governing System
Load Speed Sensor: Programmable Logic Controller
The PLC (Programmable Logic Controller) regulates feed rate based on rotor speed. Feed rate is proportional to rotor speed. Maximum feed rate is adjustable. Hammermill weight consists of shaft, hammer rods, bits, hardware, and tool holders.
Hammermill
Weight: 8,550 lbs. (3,878 kg)
Rotor Bearing Diameter: 4-7/16 in. (11.27 cm)
Rotor Shaft: 7 in (17.78 cm) Alloy Steel
Rotor Width: 64 in. (162.6 cm)
Rotor Plates: 32-1/4 in. (81.92 cm) dia. X 1-1/2 in. (3.81 cm) Thick
Tip Swing Diameter: 41 in. (104.14 cm)
Number of Hammers: 32 Single Bolt
Hammer Rods: (16) – 2 in. (5.08 cm) dia.
Screens
Screen Area: 3,705 sq. in. (2.39 sq. m)
Hole Sizes: Available in a variety of sizes
Belly Conveyor
Length: 22 ft. (6.71 m)
Width: 54 in. (137.2 cm)
Stacking Conveyor
Length: 13 ft. (4.06 m)
Width: 48 in. (121.92 cm)
Other
Electrical: 24V
Lights: Clearance, Directional
Options
Air Compressor Available
Magnetic Roller Available