Hood Equipment has been designing and manufacturing quality loading equipment for over 50 years. At Industrial Disposal Supply, we will provide you with the professional knowledge and guidance to ensure that you’re getting the right piece of handling equipment for your disposal needs. See below for additional information on the Hood 7000 Series loader.
Additional Information
- Lift Capacity at 10’ – 7,871 pounds
- Booms
- Standard boom length: 22 feet
- Main knuckle sections: fabricated high tensile steel
- Pivot Pin diameter of 2-1/2”
- Optional:
- 48” extend-o-boom
- Boom lengths up to 27’
- Stabilizers
- Pad size: 12 inches by 12 inches
- Spread: 10’6” feet at ground level
- Cylinder size – 3 inches with bore 40-inch stroke by 2-inch rod
- Individually controlled stabilizers
- Automatic load locks maximize stability on uneven terrain, stabilizers easily operated from main control position
- Specifications
- Hydraulic System
- Main boom cylinder: 6” bore x 36” stroke x 2-1/2” rod
- Jib boom cylinder: 5” bore x 30” stroke x 2-1/2” rod all cylinder barrels are heavy wall tubing
- Reservoir: 38 gallons with –
- Oil cooler recommended
- Continuous rotation pressure manifold
- Filters – double return 10-micron mounts in reservoir
- Pumps
- on-demand gear pumps
- working pressure 2250 PSI
- Lever control standard
- Optional: pilot control system
- Hoses
- All pressure hoses are constructed of 4-wire braided hose
- High pressure tubing is used in non-flex areas
- Frame Structure
- Octagon construction: fabricated high-tensile steel
- Operators Platform
- features open grate steel flooring and leg guard for safety
- Swing Motor
- Planetary swing drive gearbox with fail safe brake with large 28” turntable bearing
- Hydraulic System