The DuraTech 2009 industrial tub grinder has an impressive list of features that has made it one of the most efficient and affordable grinders on the market. These include a CAT C9 325 hp (242.4kw) Tier III diesel engine, a self-adjusting HPTO microprocessor-controlled clutch, and an enclosed engine compartment with a self-cleaning air intake system. The DuraTech 2009 industrial tub grinders are built to grind and built to last.
Additional Information
- Weight (Pintle Hitch) 24,200lbs (10,976.94 kg)
- Transport Width 8′ 3-1/2″ (2.52 m)
- Length (Pintle Hitch) 29′ 1/4″ (8.84 m)
- Axle 18,500 lbs (8,409.6kg) Single Axle
- Tongue Weight (Pintle Hitch) 5,700 lbs (2,585.5 kg)
- Brakes Air
- Electrical 12 Volt
- Tires (2) 455/50R22.5 Super Singles
- Fuel Capacity 100 Gallons (378.5 L)
- Hydraulic Oil Capacity 50 Gallons (189.3 L)
- Lights Tail, Clearance and Directional
- Engine Caterpillar C9 325 HP (242.4 kw)
- Tier III Electronic Diesel
- Clutch PT Tech HPTO-12
- Governor Electro-Hydraulic Sensing
- Tub Width 9′ 6-3/8″ (2.91 m) at Flare
- Depth 3′ 4″ (1.02 m)
- Tub Diameter at Base 7′ 6″ (2.27 m)
- Tub Wall 3/16″ (.476 cm) thick
- Tub Floor 1/4″ (.635 cm) thick
- Tub Drive Hydraulic Orbit Motor
- Discharge Conveyor 21′ 6″ (6.55 m) Top Drive –
- 24″ (60.96 cm) Wide
- Belly Conveyor 30″ (76.2 cm) Wide with a V Cleat
- Tub Speed Sensor Electronic Self Governing
- Safety Switches Safety Shutdown
- Hammers 18 Fixed Single Bolt Hammers,
- 36 Swinging Hammers
- Hammermill Opening 41″ x 25″ (104.14 cm x 63.5 cm)
- Length 40″ (101.6 cm)
- Cylinder Plates 16″ (40.64 cm) in Diameter
- 1-1/2″ (3.81 cm) ick
- Cylinder Shaft 4-1/2″ (11.43 cm) Stress Proof Steel
- Hammermill Drive Direct Drive with Built in Torque Limiter
- Bearings 3-1/2″ (8.89 cm) Pillow Block Bearings
- Hammer Rods 1-1/2″ (3.81 cm) Diameter
- Screens 1″ (2.54 cm) ick Split Screens
- Transport Height w/ Tub Cover 129.85 in (329.82 cm)